PRODUCT DESCRIPTION

The KOENG TRIJICON RMR NIGHTFORCE ADAPTER allows a Trijicon RMR compatible sight to be mounted on a Nightforce RAP-i / X-treme Duty MultiMount Kit, creating a piggyback sight solution for the Nightforce UltraMount / Unimount.  The aiming dot height is approximately 3.25″, when mounted on a 1.54″ Nightforce UltraMount with X-treme Duty MultiMount, allowing for a more upright posture, conducive to positional shooting, passive aiming, and is compatible with Nightforce 1-8x LPVOs, ATACR 4-16x, NX8 2.5-20x, and other similarly dimensioned scopes.  The height of the aiming dot can be raised with a KOENG Trijicon RMR Spacer (PN 01-076, available soon) if additional clearance is needed or desired.

The KOENG TRIJICON RMR NIGHTFORCE ADAPTER works with the following Nightforce RAP-i / Nightforce X-treme Duty MultiMount Kits.
– Nightforce A425 (X-treme Duty MultiMount, 30 mm, Black)
– Nightforce A426 (X-treme Duty MultiMount, 34 mm, Black)
– Nightforce A687 (RAP-i, 30 mm, Black)
– Nightforce A686 (RAP-i, 34 mm, Black)
– Nightforce A689 (RAP-i, 30 mm, Dark Earth)
– Nightforce A688 (RAP-i, 34 mm, Dark Earth)

Black.

Machined from 7075-T6 aluminum and MIL-A-8625 Type-3 Hardcoat anodized.

Click Here for Instruction

NOTE: Both the RMR locating tabs and MultiMount interface are machined to have a tight fit to help alleviate impact force from the mount screws and to enhave zero retention.  In some cases, the sight or the adapter plate might need to be lightly pressed by hand to be fully seated.