PRODUCT DESCRIPTION

The KOENG TRIJICON RMR LEUPOLD ADAPTER allows a Trijicon RMR compatible sight to be mounted on a Leupold IMS / Mark AR scope mount or Mark 4 scope ring, creating a piggyback sight solution for the Leupold IMS / Mark 4 scope mounting systems.

The aiming dot height is approximately 3.25″, when mounted without a spacer on a 1.5″ Leupold IMS / Mark AR mount, allowing for a more upright posture, conducive to positional shooting and passive aiming.  The aiming dot height can be raised with a KOENG Leupold Adapter Spacer (PN 01-010) if additional clearance is needed.

The KOENG TRIJICON RMR LEUPOLD ADAPTER is designed to work with the KOENG Accessory Top Ring, Leupold (PN 01-035), and is compatible with the following Leupold DeltaPoint Pro Ring Top Mount Kits.
– Leupold 175541 (1 inch)
– Leupold 175550 (30 mm)
– Leupold 175554 (34 mm)
– Leupold 175558 (35 mm)

Black.

Machined from 7075-T6 aluminum alloy and MIL-A-8625 Type-3 Hardcoat anodized.

Click Here for Instructions

NOTE: The RMR locating tabs are machined to have a tighter fit to help alleviate impact force from the mount screws and to enhave zero retention.  In some cases, the sight or the adapter plate might need to be lightly pressed by hand to be fully seated.  The included mounting screws are for our Accessory Top Ring, Leupold (PN 01-035), and might need to be shortened when used with Leupold top rings.